Pure PTFE is an extremely inert substance. It can only be corroded by alkaline metals and fluorine under high temperatures and pressures.

It cannot be dissolved or even expanded by solvents at admissible service temperatures. Certain fluoride hydrocarbons can expand and gel PTFE at temperatures approaching its crystalline melting point.

And because it’s pure PTFE, it is perfectly non-stick. Here, it’s a solid film rather than a fabric coating, so it has a longer product lifetime while retaining its excellent properties.

It is highly resistant to wear and compression, and offers excellent chemical stability. It is also a good conductor of heat.

It is available in an adhesive version (see the table below) and a non-adhesive version in thicknesses ranging from 0.5 to 80mm, in sheets or rolls (for certain thicknesses) which can then be adhesive-treated.

If you need any more information, please contact us now.


  • Among the lowest friction coefficient of any solid
  • Extremely non-stick
  • Resists temperatures of -200°C to +260°C

PURE PTFE ADHESIVE STRIP: Fabric sold per m²
or in rolls of 30m
at the width of your choice
REFERENCE Standard dimensions Thickness % PTFE WEIGHT
SKAP-05T Max width: 1000 mm 0.13 100 0.180
SKAP-10T Max width: 1000 mm 0.24 100 0.300
SKAP-20T Max width: 1000 mm 0.50 100 0.600